Ricoh SP 8400DN User Guide - Page 61

Types of envelopes Side-opening envelopes Trays 1-4 Recommended Paper Bypass tray • Flaps: closed • Bottom side of envelopes: toward the back of the machine • Side to be printed: face up • Flaps: closed • Bottom side of envelopes: toward the back of the machine • Side to be printed: face down When loading envelopes, select "Envelope" as the paper types using both [Tray Paper Settings] and printer driver and specify the thickness of envelopes. For details, see "Printing on Envelopes", Operating Instructions. To print on envelopes that are loaded with their short edges against the machine body, rotate the print image by 180 degrees using the printer driver. Recommended envelopes For information about recommended envelopes, contact your local dealer. For details about the sizes of envelopes you can load, see page 51 "Recommended Paper Sizes and Types". • Load only one size and type of envelope at a time. • The Duplex function cannot be used with envelopes. • To get better output quality, it is recommended that you set the right, left, top, and bottom print margin, to at least 15 mm (0.6 inches) each. • Output quality on envelopes may be uneven if parts of an envelope have differing thicknesses. Print one or two envelopes to check print quality. • Printed sheets are delivered to the internal tray even if you specified a different tray. • Flatten out prints if they are creased or curled. • Check the envelopes are not damp. • High temperature and high humidity conditions can reduce print quality and cause envelopes to become creased. • Depending on the environment, printing on envelopes may wrinkle them even if they are recommended. 59