Ryobi GD201 Operation Manual - Page 16
Assembly
![]() |
View all Ryobi GD201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ASSEMBLY WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1 when assembling and performing maintenance on this product. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. NOTICE: Many of the illustrations in this manual show only portions of the garage door opener. This is intentional so that we can clearly show points being made in the illustration. Never operate the garage door opener without all parts securely in place and in good operating condition. Insert the edge of the end rail into the sleeve. Slide together until rail clicks in place. If you cannot get the rail to fit by hand, try gently tapping it with a rubber mallet until it is snug and clicks into place. Be careful not to pinch or damage the belt. Repeat this process to attach the intermediate rail, second sleeve, and then the front rail. When assembled correctly, the rails should not separate easily when pulled. Pull the front pulley and belt through the first sleeve, the intermediate rail, the second sleeve, and to the top of the front rail. Turn the tension nut on the pulley rod counterclockwise to loosen. Remove the tension nut and spring from the pulley rod. Inner Trolley ASSEMBLING THE RAILS See Figures 8 - 18. Locate the following items: Front Brace End Rail Intermediate Rail Front Rail Sleeves (2) Outer Trolley Remove tie wrap from rail and pulley. Pull the front pulley and belt through the end rail and into a sleeve. Slide the outer trolley into the end rail. Pull the release lever down and move outer trolley toward the inner trolley until they are engaged. Front Pulley End Belt Rail Outer Trolley Outer Trolley Sleeve Release Lever Inner Trolley Fig. 10 End Rail Sleeve Outer Trolley Fig. 8 End Rail Fig. 9 Intermediate Rail 16 - English Fig. 11 Sleeve Fig. 12
![](/manual_guide/products/ryobi-gd201-operation-manual-4b876a2/16.png)