Ryobi GD201 Operation Manual - Page 24
Attaching Rail Assembly To Header, Bracket
![]() |
View all Ryobi GD201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
INSTALLATION ATTACHING RAIL ASSEMBLY TO HEADER BRACKET See Figure 32. Locate the following items: Large Clevis Pin Hitch Pin Place the power head on top of a prop or on the ground with a towel or packaging material beneath it. Angle the rail assembly so that it rests against the header bracket. NOTE: If a door spring or other obstruction is in the way, have someone hold the garage door opener or help to balance it on a raised support while you position the rail assembly. Align the holes in the bracket with the holes in the rail assembly as shown. Insert large clevis pin and secure with hitch pin. NOTE: The hitch pin should be installed into the first hole closest to the head of the pin. Header Bracket Hitch Pin Clevis Pin First Hole Rail Assembly Power Head Fig. 32 24 - English
![](/manual_guide/products/ryobi-gd201-operation-manual-4b876a2/24.png)