Ryobi GD201 Operation Manual - Page 34
Installing The Outdoor Keypad
![]() |
View all Ryobi GD201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
INSTALLATION INSTALLING THE OUTDOOR KEYPAD See Figures 62 - 64. Locate the following items: Outdoor Keypad Screws (1.5 in., Phillips Hd.) [2] Outdoor Keypad Pencil WARNING: Do not use garage door opener if keypads or remotes do not start and stop the motor. An opener that cannot be controlled with a keypad or remote is dangerous, can result in death or serious personal injury, and must be repaired. Key Hole Screwdriver Top Screw WARNING: Make sure the keypad is mounted high enough to prevent unauthorized activation of the garage door opener. It should be placed at least five feet above the floor so that it is inaccessible to children. Unauthorized activation of the opener can result in death or serious personal injury. WARNING: Do not start or stop the garage door opener if there is a person or object in the path of the door, the door has not been properly balanced, or if you cannot see the doorway. Failure to follow these instructions can result in death or serious personal injury. NOTE: Program the outdoor keypad and ensure that it will operate the garage door opener from your desired location prior to installing it. See Programming the Outdoor Keypad in the Operations section. Find desired location outdoors and in sight of the garage door. NOTE: The keypad should be at least five feet above the floor so it is inaccessible to children. Use a pencil to mark screw hole placement and install top screw. Place the wide portion of the key hole over the head of the top screw. Slide the keypad down until the top screw is inside the narrow portion of the key hole. Remove the battery cover and 9-volt battery. Use a level to be sure the keypad is in a vertical position, then install bottom screw into the screw hole. Install 9-volt battery. Battery Cover Bottom Screw Battery Fig. 62 Screw Hole Fig. 63 Fig. 64 Replace battery cover. For programming instructions, see Programming the Outdoor Keypad in the Operations section. 34 - English
![](/manual_guide/products/ryobi-gd201-operation-manual-4b876a2/34.png)