Ryobi GD201 Operation Manual - Page 47
Programming The Car Remotes, Using The Smartphone App
![]() |
View all Ryobi GD201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
OPERATION PROGRAMMING THE CAR REMOTES See Figure 83. WARNING: Keep moving door in sight when using car remotes. Contact with moving door can cause DEATH or serious injury. Once you begin programming the car remotes, you have two minutes to complete each step. If a step is not completed within two minutes, programming information will be erased. Press the PROGRAM button on the garage door opener's console. The main garage door opener's LEDs will turn off and the PROGRAM button will flash three times. Select button 1 or 2 on the car remote. Press the button once. The car remote's green LED will flash. The PROGRAM button on the main unit will flash three times. The garage door opener main unit LEDs will turn on. To verify that the program is set, press the car remote button you selected earlier. The garage door will open or close. Repeat this process to sync the garage door opener with an additional remote. NOTE: Buttons 1 and 2 cannot both be programmed to the same garage door opener. NOTE: Safety sensors must always be connected properly for the door to operate from the car remote. NOTE: The garage door opener cannot be operated with a car remote until travel limits have been set. USING THE SMARTPHONE APP See Figure 84. Visor Clip Car Remote Buttons Fig. 83 8:08 AM 100% WARNING: To reduce the risk of injury to persons - Only enable the RYOBI Garage Door Opener Module System App feature when installed with a sectional door. WARNING: Devices or features, such as the RYOBI Garage Door Opener Module System App, that allow you to open and close the garage without the garage door being in view should only be used with sectional garage doors. Fig. 84 NOTE: A Wi-Fi router connected to the internet is required to use the smart phone app. You will not be able to open your garage door or receive other information from installed modules using the smart phone app if your home's Wi-Fi connection with your garage door opener is not connected or functioning properly. Download the RYOBI Garage Door Opener Module Sys- tem App from the App Store or Google Play Store. Follow the instructions provided in the app and app guide to control your garage door opener and modules. For more information, visit www.ryobitools.com. 47 - English
![](/manual_guide/products/ryobi-gd201-operation-manual-4b876a2/47.png)