Ryobi GD201 Operation Manual - Page 40
Led Functions, Red Led, Transmitter, Green Led, Receiver, Problem, Solution
![]() |
View all Ryobi GD201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
OPERATION SAFETY SENSOR DIAGNOSTIC FEEDBACK LED FUNCTIONS RED LED GREEN LED (TRANSMITTER) (RECEIVER) PROBLEM SOLUTION ON ON No problem indicated No action required Power head is unplugged or the battery Connect to power supply or charge is depleted the battery pack Wires from power head may be Replace damaged or broken wires damaged OFF OFF Wires not connected Connect wires to power head Wires connected to the wrong terminal Connect wires to the correct terminal One or both sensors are defective Contact customer service for assistance OFF ON One or both sensors are defective Contact customer service for assistance The safety sensors are out of alignment Align the safety sensors The safety sensors are obstructed Remove all objects between the safety sensors ON OFF One or both sensors are defective Contact customer service for assistance Safety sensor (transmitter) is not Contact customer service for sending beam assistance Safety sensor (receiver) is in direct Change the position of the sensor sunlight (reciever) or reverse the positions of ON BLINKING both sensors. (See figure 70.) One or both sensors are defective Contact customer service for assistance 40 - English
![](/manual_guide/products/ryobi-gd201-operation-manual-4b876a2/40.png)