Samsung A877 User Manual - Page 77

4. Select the parameter you want to edit: • Set Name: enter a profile name. • Access Name: edit the access point name. • Auth Type: select the type of authentication used for this WAP connection: None, Normal, or Secure. • User ID: enter the User ID required to connect to the network. • Password: enter the user password required to connect to the network. • Protocol: set the connection protocol used by the WAP browser: WAP, HTTP, or Other. • Home URL: enter the URL address of the page to be used as your homepage. • Proxy Address: MEdia Net set as the proxy server address and port. • Linger Time (sec.): set a time period (in seconds) after which the network is disconnected if there has been no new data traffic in that time. • Advanced Settings: allows you to configure some of the IP-specific information: Static IP, Static DNS, Server information, and Traffic Class. - Static IP: specify if you want to manually enter an IP address. If you want the IP address to be automatically assigned by the server, remove the check mark. - Static DNS: specify if you want to manually enter the Domain Name Server (DNS) address. If you want the address to be automatically assigned by the server, remove the check mark. - Traffic Class: select the traffic class. Note: The WAP settings may vary depending on the service provider. 5. Touch Save to store these new settings. IMS Settings IMS is the method used to connect to the server in order set up the Video Share option. 1. From Idle mode, touch ➔ Settings ➔ Connectivity ➔ IMS Settings. 2. Touch one of these options: • IMS Service allows you to set the IMS service to On or Off. Touch Save to store the new setting. Changing Your Settings 73