Samsung HT-D5100 User Manual (user Manual) (ver.1.0) (English, French) - Page 26
Connecting the FM Antenna - wireless adapter
View all Samsung HT-D5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Connections Wireless Network You can connect to the network with a Wireless IP sharer. 1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the Wireless LAN Adapter on the rear panel of the product. 2. Set the network options. (See page 36) Broadband service LAN DIGITAL AUDIO IN H OPTICAL Wireless IP sharer WIRELESS LAN PC Wireless LAN Adapter (not supplied) Networking with PC for AllShare function (See page 66) ✎ NOTE This product is compatible with only Samsung's Wireless LAN Adapter. (not supplied) (Model name: WIS09ABGN). - The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung Electronics retailer for purchasing. You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.) Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles, interference by other radio devices, etc). Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported. When applying the security key for the AP (wireless IP sharer), only the following is supported. 1) Authentication Mode : WEP, WPAPSK, WPA2PSK 2) Encryption Type : WEP, AES For the AllShare function, a PC must be connected in the network as shown in the figure. Connecting the FM Antenna FM Antenna (supplied) FM ANT 1. Connect the FM antenna supplied to the FM ANTENNA Jack. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. ✎ NOTE This product does not receive AM broadcasts. 26 English HT-D5100_XAC_0201.indd 26 WIRELESS 2011-02-09 ¿ÀÈÄ 4:57:03