Samsung HT-D5100 User Manual (user Manual) (ver.1.0) (English, French) - Page 68
Symptom, Check/Remedy
View all Samsung HT-D5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Other Information Symptom Aspect ratio cannot be changed. Check/Remedy • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. • The product is not working. (Example: The power goes out or a strange noise is heard.) • The Product is not working normally. The rating level password has been forgotten. Can't receive radio broadcasts. • Press and hold the romote control's STOP ( I ) button for 5 seconds in STANDBY mode. - Using the RESET function will erase all stored settings. Do not use this unless necessary. • With no disc in the product, press and hold the product's STOP ( I ) button for longer than 5 seconds. INIT appears on the display and all settings will return to the default values. And then press the POWER button. - Using the RESET function will erase all stored settings. Do not use this unless necessary. • Is the antenna connected properly? • If the antenna's input signal is weak, install an external FM antenna in an area with good reception. While listening to TV audio through the Product, no sound is heard. • If the OPEN/CLOSE ( ) button is pressed while listening to TV audio using the D.IN or AUX functions, the BD/DVD functions are turned on and the TV audio is muted. "Not Available" appears on screen. If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV. No HDMI output. Abnormal HDMI output screen. • The features or action cannot be completed at this time because: 1. The BD/DVD's software restricts it. 2. The BD/DVD's software doesn't support the feature (e.g., angles) 3. The feature is not available at the moment. 4. You've requested a title or chapter number or search time that is out of range. • Press and hold the STOP ( I ) button on front panel for more than 5 seconds with no disc inserted. All settings will revert to the factory settings. • Check the connection between the TV and the HDMI jack of the Product. • Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution. • If random noise appears on the screen, it means that TV does not support HDCP (High-bandwidth Digital Content Protection). 68 English HT-D5100_XAC_0201.indd 68 2011-02-09 ¿ÀÈÄ 4:57:59