Samsung HT-D5100 User Manual (user Manual) (ver.1.0) (English, French) - Page 33
Musical Room Calibration, User EQ
View all Samsung HT-D5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
03 Setup Musical Room Calibration By setting the Musical Room Calibration (MRC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for your environment. ASC IN 500mA 500mA ASC IN ASC microphone Musical Room Calibration Mode You will hear either the Musical Room Calibration mode or the User Speaker Settings. • Off : You will hear sound in the the Speaker Setting value. • On : You will hear sound in the Musical Room Calibration mode. Measurement 1. Plug the ASC microphone into the ASC IN jack. 2. Place the ASC microphone at the listening position. • Musical Room Calibration will be automatically set up in the following sequence: Front L Center Front R Surround R Surround L Subwoofer • Press the RETURN button to cancel the Musical Room Calibration Setting. ✎ NOTE Setting the Musical Room Calibration function takes about 3 minutes. The Musical Room Calibration setup can be made when there is no disc in the product. If the ASC microphone is disconnected during the Musical Room Calibration setup, the setup will be canceled. When the Musical Room Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode will not work. If the product is connected to external devices or other components (such as an iPod, AUX, D.IN), the Musical Room Calibration Setup may not work properly. Noise may result in wrong measurement. So please proceed with the measurement in a quiet room to obtain proper calibration. Place the microphone on the main listening position. Nothing should get in the way between speakers and microphone. Note that the test tone of the speaker may be loud when conducting the test. Do not place the microphone behind the furniture or too close to the wall. Otherwise, it can produce an incorrect test result. User EQ You can configure the equalizer settings manually to your preference. Settings Display Audio Network System Language Security General Support User EQ 0 0 0 0 0 0 0 6 0 6 250Hz 600Hz 1kHz 3kHz 6kHz 10kHz 15kHz A Reset > Adjust < Move ' Return HT-D5100_XAC_0201.indd 33 33 English 2011-02-09 ¿ÀÈÄ 4:57:13