Samsung HT-FM65WC User Manual - Page 25

Wireless Network You can setup a wireless network connection in three ways: - Wireless Automatic - Wireless Manual - WPS(PBC) Before you configure the wireless network connection, disconnect any wireless network device currently connected to the product or, if applicable, the product's current wired connection. K Wireless - Automatic After following Steps 1 to 3 in "Configuring Your Network Connection" on page 24: 1. In the Network Settings screen, change Network type to Wireless. Then, select Connect and press the E button. The product searches for and then displays a list of the available networks. Network Settings Select your network type. Network type Wireless network si-ap iptime iptime5G KIMING_VTOWER TIAS Wireless You can connect your Blu-ray player to the internet. Please select which wireless network to use. Refresh WPS(PBC) 2. Select the desired network, and then press the E button. 3. On the Security screen, enter your network's security code or pass phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with buttons, and then pressing E button. 4. When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network. | NOTES | \ You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem. K Wireless - Manual If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. After following Steps 1 to 3 in "Configuring Your Network Connection" on page 24: 1. In the Network Settings screen, change Network type to Wireless. Then, select Connect and press the E button. The product searches for and then displays a list of the available networks. 2. Scroll through the list, select the desired network or Add Network, and then press the E button. 3. If you selected a network in Step 2, go to Step 6. If you selected Add Network, go to Step 4. 4. Enter your wireless network or wireless router's name. • Enter numbers directly using the number buttons on your remote control. • Enter letters by selecting a letter with the buttons, and then pressing the E button. • To display capital letters (or redisplay small letters if capital letters are displayed), select , and then press the E button. • To display symbols and punctuation, select 123#&, and then press the E button. To redisplay letters, select 123#&, and then press the E button. When finished, select Done, and then press the E button. 5. On the Security type screen that appears, use the ▲▼buttons to select the network's Security type, and then press the E button. On the next screen, enter your network's security code or pass phrase. • Enter numbers directly using the number buttons on your remote control. • Enter letters by selecting a letter with the buttons, and then pressing the E button. When finished, select Done, and then press the E button. The product searches for the network. 6. The Network connection fail screen appears. Use ◄► buttons to select IP Settings, and then press the E button. 7. Select the IP Setting field, and then set it to Enter manually. 8. Select a network value to enter (IP Address, for example), and then press E button. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the E button. English 25 | 04 Settings