Samsung NV10 User Manual (user Manual) (ver.1.0) (English) - Page 15

Instructions on how to use the memory card ƃ If the memory card is subjected to any of the following, the recorded data may become corrupted : - When the memory card is used incorrectly. - If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading. ƃ Samsung cannot be held responsible for lost data. ƃ It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks, CD etc. ƃ If there is insufficient memory available : A [Memory Full!] message will appear and the camera will not operate. To optimise the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory card. INFORMATION ƃ Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data in the memory card. ƈ The camera can use SD Memory Cards and MMC (Multi Media Cards). When using MMC cards, please consult the instructions supplied with the cards. Card pins Write protect switch Label [SD (Secure Digital) memory card] The SD memory card has a write protect switch that prevents image files from being deleted or formatted. By sliding the switch towards the bottom of the SD memory card, the data will be protected. By sliding the switch towards the top of the SD memory card, the data protection will be cancelled. Slide the switch to the top of the SD memory card before taking a picture. ƈ When using a 256MB MMC memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type. Recorded image size Super Fine Fine 10M 49 95 7M 66 126 Still image 5M 88 167 3M 124 229 1M 451 691 M* ovie 640 - - 320 - - Normal 139 182 237 319 840 - 30FPS - 00:12:39 00:30:27 15FPS - 00:20:46 00:57:36 * The recording times can be changed by the zoom operation. The zoom button doesn't operate while recording movies. ŝ14Ş