Samsung NV10 User Manual (user Manual) (ver.1.0) (English) - Page 58

Before contacting a service centre

Page 58 highlights

Before contacting a service centre Battery power quickly drains ϛThe Camera is being used in low temperatures ƍ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it in order to take images Camera does not take images when pressing the Shutter button ϛThere is insufficient memory capacity ƍ Delete unnecessary image files ϛThe memory card has not been formatted ƍ Format the memory card (p.52) ϛThe memory card is exhausted ƍ Insert a new memory card ϛThe memory card is locked ƍ Refer to [Card Locked!] error message (p.56) ϛThe cameraŖs power is off ƍ Turn the camera power on ϛThe battery is exhausted ƍ Insert charged battery (p.13) ϛBattery is inserted incorrectly with the polarities reversed. ƍ Insert the battery according to the polarity marks (+, -) The camera suddenly stops working while in use ϛThe camera stopped due to a malfunction ƍ Remove /re-insert battery and switch the camera on The images are unclear ϛA picture was taken the subject without setting an appropriate macro mode ƍ Select an appropriate macro mode to take a clear image. ϛTaking a picture beyond the flash range ƍ Take a picture within the flash range ϛThe lens is smudged or dirty ƍ Clean the lens The flash does not fire ϛFlash off mode has been selected ƍ Dis-engage flash off mode ϛThe camera mode can't use flash ƍ Refer to the FLASH instruction (p.25) Incorrect date and time is displayed ϛThe date and time have been set incorrectly or the camera has adopted the default settings ƍ Reset the date and time correctly The camera buttons do not operate ϛCamera malfunction ƍ Remove/re-insert battery and switch the camera on A card error has occurred while the memory card is in the camera. ϛIncorrect memory card format ƍ Re-format the memory card The images don't play back ϛIncorrect file name (Violation of DCF format) ƍ Do not change the image file name ŝ57Ş

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

57
Before contacting a service centre
The images are unclear
A picture was taken the subject without setting an appropriate macro mode
Select an appropriate macro mode to take a clear image.
Taking a picture beyond the flash range
Take a picture within the flash range
The lens is smudged or dirty
Clean the lens
The flash does not fire
Flash off mode has been selected
Dis-engage flash off mode
The camera mode can't use flash
Refer to the FLASH instruction (p.25)
Incorrect date and time is displayed
The date and time have been set incorrectly or the camera has adopted the
default settings
Reset the date and time correctly
The camera buttons do not operate
Camera malfunction
Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
Incorrect memory card format
Re-format the memory card
The images don't play back
Incorrect file name (Violation of DCF format)
Do not change the image file name
Battery power quickly drains
The Camera is being used in low temperatures
Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
remove it in order to take images
Camera does not take images when pressing the Shutter button
There is insufficient memory capacity
Delete unnecessary image files
The memory card has not been formatted
Format the memory card (p.52)
The memory card is exhausted
Insert a new memory card
The memory card is locked
Refer to [Card Locked!] error message (p.56)
The camera
s power is off
Turn the camera power on
The battery is exhausted
Insert charged battery (p.13)
Battery is inserted incorrectly with the polarities reversed.
Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
The camera stopped due to a malfunction
Remove /re-insert battery and switch the camera on