Samsung NV10 User Manual (user Manual) (ver.1.0) (English) - Page 52

Setup menu [ Quick view ] ƈ If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. ƃ Sub menus [Off] : The quick view function can't be activated. [0.5, 1, 3 sec] : The captured image is briefly displayed during the selected time. Off 0.5 sec 1 sec 3 sec Ȝ Imprint LCD AF Lamp Power Off Quick View Exit:BACK [ Start up image ] ƈ You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. ƃ Start up image : [Off], [LOGO], [User Image] - Use a saved image for the start-up image with the [START IMAGE] in the [RESIZE] menu in the play mode. - The start-up image will not be deleted by [DELETE] or [Format] menu. - The User images will be deleted by [Reset] menu. Off Ȝ LOGO User image Start Image Sound Volume BEEP Sound Start Sound Shutter Sound Exit:BACK [ Sound Volume ] ƈ You can select the sound volume of start sound, operation sound and shutter sound. ƃ [Sound Volume] sub menus : [Off], [Low], [Medium], [High] Off Low Ȝ Medium High Start Image Sound Volume BEEP Sound Start Sound Shutter Sound Exit:BACK [ Operation Sound ] ƈ If you set sound to ON, various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status. ƃ [Sound] sub menus : [Off], [Sound 1], [Sound 2], [Sound 3] Off Sound 1 Sound 2 Ȝ Sound 3 Start Image Sound Volume BEEP Sound Start Sound Shutter Sound Exit:BACK [ Start up sound ] ƈ You can select the sound that is activated whenever the camera is turned on. ƃ Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3] - If the start up image is set to [Off], the start up sound will not activate, even though you may have set these to on. Off Sound 1 Sound 2 Sound 3 Ȝ Start Image Sound Volume BEEP Sound Start Sound Shutter Sound Exit:BACK ŝ51Ş