Samsung NV10 User Manual (user Manual) (ver.1.0) (English) - Page 22

Using the camera buttons to set the camera ƈ The recording mode function can be set up by using the camera buttons. POWER button ƃ Used for turning the camera's power on / off. ƃ If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 50 for more information about the auto power off function. Shutter button ƃ Used for taking an image or recording voice in the RECORDING mode. ƃ In MOVIE CLIP mode : Pressing the shutter button down fully starts the process for recording a movie clip. Press the shutter button once and the movie clip is recorded for as long as the available recording time in the memory allows. If you wish to stop recording, press the shutter button again. ƃ In STILL IMAGE mode : Pressing the shutter button down halfway activates the autofocus and checks the condition of the flash. Pressing the shutter button down fully takes and stores the image. If you select voice memo recording, the recording will start after the camera has finished storing the image data. ZOOM W / T button ƃ If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. ƃ This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X. ƃ TELE Zoom Optical zoom TELE : Pressing the ZOOM T button. This will zoom into the subject i.e. the subject will appear nearer. Digital zoom TELE : When the maximum (3X) optical zoom is selected, pressing the ZOOM T button activates the digital zoom software. Releasing ZOOM T button stops the digital zooming at the required setting. Once the maximum digital zoom (5X) is achieved, pressing the ZOOM T button will have no effect. Pressing the ZOOM T button Pressing the ZOOM T button [WIDE zoom] [TELE zoom] [Digital zoom 5X] ŝ21Ş