Schwinn 810 Treadmill Service Manual - Page 109
Console Assembly.
View all Schwinn 810 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the ! power cord from the wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure location. 1. Unplug the power cord from the machine and wait 5 minutes. Place the power cord in a secure location. 2. Using a #2 Phillips screwdriver, remove the Handlebar Shrouds from the machine. NOTICE: * To assist with re-assembly, install the Inner Handlebar Shrouds first. X2 #2 * * X2 #2 #2 3. Using a 6mm hex wrench, remove the indicated hardware from the machine. Then safely lift the right side of the Console Assembly just enough to expose the Cable Connections. Disconnect the Cables and remove the Console Assembly. Note: This step may require two people. NOTICE: * To assist with re-assembly, start this hardware first. X2 * 6mm * X2 6mm 109