Schwinn 810 Treadmill Service Manual - Page 65

A second person is required to assist with the tilting of

Get Schwinn 810 Treadmill PDF manuals and user guides View all Schwinn 810 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

5. Using a #2 Phillips screwdriver remove the 2 indicated screws from the Motor Cover and remove it. 6. Remove the connectors for the Incline Motor Potentiometer and the Incline Motor from the Motor Control Board after noting their locations. Note: See detailed diagram and image on the following page to assist. Be sure to note where all cables attach for re-assembly. 7. Make sure that there is safe clearance around, on and above the treadmill to one side. Tilt the machine onto the side being sure not to grasp the Console. A second person is required to assist with the tilting of the machine. Do not tilt the machine unless the walking deck is in the folded, locked position. Be sure there is adequate clearance for the raised deck. Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these components. Do not try to do heavy or awkward steps on your own. Motor Control Board (MCB) 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
65
5. Using a #2 Phillips screwdriver remove the 2 indicated screws from the
Motor Cover and remove it.
6. Remove the connectors for the Incline Motor Potentiometer and the
Incline Motor from the Motor Control Board after noting their locations.
Note:
See detailed diagram and image on the following page to assist. Be
sure to note where all cables attach for re-assembly.
7. Make sure that there is safe clearance around, on and above the tread-
mill to one side. Tilt the machine onto the side being sure not to grasp the
Console.
A second person is required to assist with the tilting of the
machine. Do not tilt the machine unless the walking deck is in
the folded, locked position. Be sure there is adequate clear-
ance for the raised deck. Some components of the equipment
can be heavy or awkward. Enlist the service of a second
person when you do maintenance steps involving these
components. Do not try to do heavy or awkward steps on your
own.
Motor Control Board
(MCB)