Schwinn 810 Treadmill Service Manual - Page 24
Replace Console if
View all Schwinn 810 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Console Issues (page 2 of 2) If Console will not light up, follow "Unit will not power on" Troubleshooting BEGIN HERE: Procedure. If the units of measure are incorrect, follow the Owner's Manual instructions to correct the setting before beginning these steps. Fan will not turn on or off. Turn machine power off for 5 minutes and retry. Unplug machine from power source and remove any blockages, then reset. Replace Console if blockage cannot be removed or if fan still does not turn off. Speed is incorrect. Refer to the Owner's Manual "Console Setup Mode", ensure that the correct units of measure are set. Disconnect machine from power for 1 minute, then follow Service Mode Procedure 3 to reset the Console. Console continuously cycles through program screens. Console is in demonstration mode. Hold down the PAUSE/STOP button and Down arrow button together for 3 seconds. Is the issue still NO Issue resolved present? YES Contact Customer Care (if inside US/Canada) or your local distributor (if outside US/Canada). 24