Schwinn 810 Treadmill Service Manual - Page 19
Noise Issues, BEGIN HERE
![]() |
View all Schwinn 810 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Noise Issues BEGIN HERE Is the noise a thump/bump that happens once per revolution? NO YES About Noises: A "thumping" noise is normal for a new machine or new Walking Belt, and will go away with with use. This is caused by the Belt conforming to the Rollers and having a "flat spot" on it. If the noise only happens when the user is walking on the machine, have a 2nd user walk on the machine while the user locates the source of the noise. Start a manual workout and advance the speed to 2.0 mph. Is the noise present? YES Move around the machine and listen for location of noise. Does noise come from Rear Roller? YES NO NO Does the sound happen only when walking? YES Check and tighten Deck Bolts. Replace Deck if it persists. NO Shut machine off and check Levelers to ensure machine is not rocking. Adjust Levelers so that machine is secure. Replace Drive Motor Shut off machine and wait 5 minutes. Remove Motor Cover. Turn machine back on and listen for noise. MOTOR COVER Is noise coming from under machine or from inside Motor Cover? DRIVE MOTOR Is noise from Front Roller or Drive Motor? FRONT ROLLER UNDERNEATH Shut off machine and check underneath for something making contact with the Belt. Remove any obstruction. Replace Front Roller Obstruction removed Replace Rear Roller 19
![](/manual_guide/products/schwinn-810-treadmill-service-manual-1818dc8/19.png)