Schwinn 810 Treadmill Service Manual - Page 18
Unit will not power on, or power is on but Console does not light up, BEGIN HERE
View all Schwinn 810 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Unit will not power on, or power is on but Console does not light up BEGIN HERE Unplug the power cord from both ends. Inspect the entire cord for any damage or crimps. Plug the power cord back in securely at both ends. Replace power cord if any damage is noted. YES Does light come on? Is the power cord NO plugged directly into a NO 3-prong wall outlet? Connect power cord directly to a 3-prong outlet. YES Unplug the power cord from the wall outlet and the machine. Wait 5 minutes before proceeding. Remove the Motor and MCB Covers. Check/reseat the AC power wiring using the "Replace the Power Inlet" procedure in the Service Manual as a reference, and ensure all wires are correctly connected and secure. Check/reseat the AC power wiring using the "Replace the Power Inlet" procedure in the Service Manual as a reference, and ensure all wires are correctly connected and secure. Verify outlet is working by connecting another device, such as a lamp. If not working, find a working outlet. Is the machine NO Circuit Breaker tripped? YES Reset breaker by switching the main power switch to off and back to on. The breaker is part of the main power switch on front of machine. Unplug the power cord from the wall outlet and the machine. Wait 5 minutes before proceeding. Remove the Motor and MCB Covers. Replace I/O cables YES Is the issue you were experiencing still present? NO Issue resolved NO Is the issue you were experiencing still present? YES Contact Customer Care (if inside US/Canada) or your local distributor (if outside US/Canada). Replace On/Off Rocker Switch YES Does the Circuit Breaker keep tripping? NO Issue resolved 18