Schwinn 810 Treadmill Service Manual - Page 97
Motor Cover.
View all Schwinn 810 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the ! power cord from the wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure location. 1. Unplug the power cord from the machine and wait 5 minutes. Place the power cord in a secure location. 2. Using a #2 Phillips screwdriver remove the 4 indicated screws from the Motor Cover. Motor Cover 3. Using the support bar found below the rear of the walking belt, lift the walking deck fully upward and engage the hydraulic lift. Be sure that the hydraulic lift is correctly locked in place. You will hear an audible click when the hydraulic lift shifts into the locked position. Use proper safety precautions and lifting techniques. Bend your knees and elbows, keep your back straight and pull up equally with both arms. Straighten your legs to lift. Make sure that your own physical strength is capable of lifting the walking deck until it engages the locking mechanism. Use a second person if necessary. Do not use the walking belt or rear roller to lift the treadmill. These parts do not lock in place and can abruptly move. Injury to you or damage to the machine can occur. 4. Make sure that the locking mechanism is engaged. Carefully pull back on the walking deck and make sure that it does not move. When you do this, keep clear of movement path in case the treadmill lock is not properly engaged. Do not lean against the treadmill when it is folded. Do not put items on it that could cause it to become unstable or fall. Support Bar 97