Schwinn 810 Treadmill Service Manual - Page 45
Remove the old Deck Wheel, and attach the new Deck Wheel.
![]() |
View all Schwinn 810 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
5. Using a #2 Phillips screwdriver, remove the indicated screw (with arrows) from the Rear Roller Cover. 6. Remove the Rear Roller Covers from the machine. Rear Roller Cover 7. Using a 13mm wrench and a 6mm hex wrench, remove the hardware indicated from the Deck Wheel. 8. Remove the old Deck Wheel, and attach the new Deck Wheel. 9. Re-install all remaining parts that were removed in reverse order. 45
![](/manual_guide/products/schwinn-810-treadmill-service-manual-1818dc8/45.png)
45
5. Using a #2 Phillips screwdriver, remove the indicated screw (with ar-
rows) from the Rear Roller Cover.
6. Remove the Rear Roller Covers from the machine.
7. Using a 13mm wrench and a 6mm hex wrench, remove the hardware
indicated from the Deck Wheel.
8. Remove the old Deck Wheel, and attach the new Deck Wheel.
9. Re-install all remaining parts that were removed in reverse order.
Rear Roller Cover