Schwinn 810 Treadmill Service Manual - Page 35
from the Incline Motor Assembly.
View all Schwinn 810 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
10. Make sure that there is safe clearance around, on and above the treadmill to one side. Tilt the machine onto the side being sure not to grasp the Console. A second person is required to assist with the tilting of the machine. Do not tilt the machine unless the walking deck is in the folded, locked position. Be sure there is adequate clearance for the raised deck. Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these components. Do not try to do heavy or awkward steps on your own. 11. Using two 17mm wrenches, remove the indicated hardware (with oval) from the Incline Motor Assembly. Incline Motor Assembly Base Frame Weldment Bottom Motor Cover 12. Using a #2 Phillips screwdriver, remove the 7 indicated screws from the Bottom Motor Cover. Note: The Base Frame Weldment has been removed for clarity. 13. Remove the old Bottom Motor Cover and attach the new Bottom Motor Cover. Note: Be sure to route the cables from the Base Assembly through the new Bottom Motor Cover. 14. Using two 17mm wrenches in the Motor Compartment, reattach the hardware to the Incline Motor Assembly. 35