Schwinn 810 Treadmill Service Manual - Page 42
Remove the Deck Suspension.
![]() |
View all Schwinn 810 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
5. Using a #2 Phillips screwdriver remove the 2 screws (indicated by arrow) from the Deck Suspensions. 6. Remove the Deck Suspension. 7. Installation of the new Side Rail is the reverse procedure. Deck Suspension 8. Make sure there is sufficient space to lower the walking deck. Keep a minimum clearance behind the machine of 79" (2 m) and 19.7" (0.5 m) on each side. This is the recommended safe distance for access, movement and emergency dismounts from the machine. 9. Make sure there is no object on or around the treadmill to spill or cause blockage from the fully unfolded position. 10. Slightly push the walking deck forward toward the console. With your foot lightly push the top part of the hydraulic lift forward until the locking tube releases and you can pull the walking deck away from the console. Hold up the rear of the walking deck, and move to the side of the machine. Keep clear of the movement path of the walking deck. 11. The hydraulic lift is set up to drop gradually. Hold onto the walking deck until approximately 2/3 of the movement down. Lower the weight with your legs. Be aware that the walking deck can possibly drop quickly in the last part of the movement. 12. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 42
![](/manual_guide/products/schwinn-810-treadmill-service-manual-1818dc8/42.png)