Seiko SSG021 Owner Manual - Page 32

English Misalignment of Date Misalignment of the stopwatch hands Time difference Troubles Even if the watch receives a radio wave successfully, it displays the incorrect date (the time is correct). After resetting the stopwatch, the stopwatch hands do not stop at the 0-second position. Time zone cannot be set. Operation The buttons or crown cannot be activated (operated). Possible causes The preliminary position of the date is misaligned. This happens when the date is out of preliminary position as a result of external influences or system reset. The stopwatch hands are out of the preliminary position. This happens when the stopwatch hands are out of the preliminary position as a result of external influence or system reset. The stopwatch hands are moving. The stored energy is running short. Date numeral in the date window or the day hand is moving right after the various crown or button operations for setting. Forget step in the middle of the setting procedures. Others The innersurface of the glass is clouded. Moisture has entered the watch due to the deterioration of the packing. * For the solution of troubles other than the above, consult the retailer from whom the watch was 62 purchased. JOEE


 Solutions Set the preliminary position of the date to "1" (1st). Adjust the preliminary position of the stopwatch hands to "0." Reset the stopwatch before setting the time zone. Fully charge the watch so that the second hand may move at one-second intervals. Wait with the watch untouched. When the movement of the date numeral stops, the crown and buttons can be operated. ①When the crown is pulled out, push it back in. ②Leave the watch untouched for a while. The watch will resume its normal movement. ③Then start the setting procedure from the beginning. Contact the retailer from whom the watch was purchased. 63 English