Sony DVWM2000 Product Manual (dvwm2000 installation manual) - Page 16
Signal Inputs and Outputs
View all Sony DVWM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1-8. Signal Inputs and Outputs 1-8. Signal Inputs and Outputs Reduced drawing of rear panel 3 1 2 5 4 n Meanings of "*" marks applied for the connector names are shown below: *1 : Connector for recorder *2 : Connector for player *3 : Connector for HDW *4 : Connector for DVW *5 : Connector for MSW *6 : Connector for MSW-M2000E/M2000EP/M2100E/M2100EP Input connectors 1 AUDIO INPUT *1 1 CUE IN *1, 3, 4 1 TIME CODE IN *1 2 VIDEO INPUT, REF.VIDEO *1, 4, 5 REF. INPUT, REF.VIDEO *2, 5 REF. INPUT *3 2 VIDEO INPUT, COMPOSITE *1, 4, 5 2 VIDEO INPUT, COMPONENT *1, 4, 5 3 AUDIO INPUT (AES/EBU) *1 5 SDI INPUT *1, 4, 5 5 SDTI-CP INPUT *1, 5 5 HD SDI INPUT *1, 3 5 SDTI INPUT (OPTION) *1, 3 1-10 XLR 3-pin x 4 (1 set : CH1, CH2, CH3, and CH4) Analog audio LOW OFF : _60 dBu, high impedance, balanced HIGH OFF : +4 dBu (Standard), high impedance, balanced HIGH ON : +4 dBm (Standard), 600 Z termination, balanced XLR 3-pin x 1 Analog audio LOW OFF : _60 dBu, high impedance, balanced HIGH OFF : +4 dBu (Standard), high impedance, balanced HIGH ON : +4 dBm (Standard), 600 Z termination, balanced XLR 3-pin x 1 Time code 0.5 to 18 V p-p, 10 kZ, balanced BNC x 2 in loop through connection Outside reference video signal SD : 0.3 V p-p, 75 Z, sync negative (Black burst or composite sync) HD : 0.6 V p-p, 75 Z, sync negative (Ternary SYNC) (HDW series only) BNC x 2 in loop through connection Analog composite video 1.0 V p-p, 75 Z, sync negative BNC x 3 (1 set : Y, R-Y, and B-Y) Analog component video Y : 1.0 V p-p, 75 Z, sync negative R-Y/B-Y : 0.7 V p-p, 75 Z BNC x 4 (1 set : CH1/2, CH3/4, CH5/6, and CH7/8) or BNC x 2 (1 set : CH1/2, CH3/4) Digital audio AES/EBU format, complies with AES-3id-1995 BNC x 1 (active through out x 1) Serial digital interface (270 Mbit/s), complies with SMPTE 259M & ITU-R BT.656 BNC x 1 Serial data transport interface (270 Mbit/s), complies with SMPTE 326M (SDTI-CP) BNC x 1 (input monitor x 1) Serial digital interface (1.485 Gbit/s), complies with SMPTE 292M BNC x 1 Serial data transport interface (270 Mbit/s), complies with SMPTE 305M (SDTI) HDW-2000/M2000/M2000P/S2000/S2000P/M2100/M2100P, DVW-2000/2000P/M2000/M2000P MSW-2000/A2000/A2000P/M2000/M2000P/M2000E/M2000EP/M2100/M2100P/M2100E/M2100EP