Sony DVWM2000 Product Manual (dvwm2000 installation manual) - Page 26
-4., SS-89 Board
View all Sony DVWM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
1-10. Switch Settings on Circuit Boards 1-10-4. SS-89 Board n If necessary, perform the following settings for DVW/MSW series. They are not required for HDW series. A B C D E F G H J K SS-89 N P 1 L M S101 S1501 S1502 2A 3 4 5 6 SS-89 Board (Side A) < Top View > Operation mode settings (for MSW-2000 only) n Refer to Section 1-11 for the DVW series settings. Ref. No. Bit Name S1501 8 525/625 Description OFF: 525 mode ON: 625 mode Factory setting ON m . To use MSW-2000 in 525 mode, please turn this switch to OFF. In the case of models other than MSW-2000, setting change is not required because the switch is set up by the NTSC model or PAL model. . Although "ERROR 96" is displayed in MSW-2000 after the above settings are switched, it will disappear by turning the power off then on. Menu display settings (for DVW/MSW series) Ref. No. Bit Name S1502 1 EXTENDED MENU 2 MAINTENANCE MODE ACCESS ENABLE 6 CUSTOMIZE MENU Description OFF: Not display extended menu of setup menu ON: Displays extended menu of setup menu OFF: Not enter into maintenance mode from lower control panel ON: Enters into maintenance mode from lower control panel OFF: Disables access to Setup menu customize mode ON: Enables access to Setup menu customize mode Factory setting OFF (DVW/MSW series) ON (HDW series) OFF (DVW/MSW series) ON (HDW series) OFF n Refer to the operation manual for the details of ITEM-H00 through ITEM-900 and ITEM-B00 series. Refer to Section 1 of the maintenance manual volume 1 for the details of ITEM-F series. 1-20 HDW-2000/M2000/M2000P/S2000/S2000P/M2100/M2100P, DVW-2000/2000P/M2000/M2000P MSW-2000/A2000/A2000P/M2000/M2000P/M2000E/M2000EP/M2100/M2100P/M2100E/M2100EP