Sony VGX-XL2 User Guide (Computer Component) - Page 26
VHF/UHF Connector (for Receiving Digital TV Transmission, Additional TV Connections - drivers
View all Sony VGX-XL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Additional Notes: • If your TV has a HDMI™ connector and a DVI-D connector, Sony recommends using the HDMI™ connector. • The HDMI cable carries both video and audio signals. • You cannot use HDMI™ and Component Video connections at the same time. • If device drivers other than the ones provided by Sony are used, the image may not be displayed and the audio may not be heard. Always use the device driver provided by Sony for any updates. • You can connect the HDMI™ out to an A/V receiver/amp and audio will be heard through the AV amp and then another HDMI™ cable can be connected from the AV amp to the TV for the display. (Some protected video content may not display with this type of connection. A direct connection is advised.) VHF/UHF Connector (for Receiving Digital TV Transmission If you have an antenna for receiving the over-the-air signals transmitted by a digital TV broadcasting system, you can connect it to receive these signals for digital televisions, for example high definition TVs. Refer to the "Connecting to an Antenna (air) for Digital Television System (ATSC Signal Standard)" in the next section for more information. Additional TV Connections Note: Your VAIO® XL2A computer is supplied with certain video cables. Depending on your in home cable access, you may require extra cables, adapters or connection equipment not supplied with your computer. Connecting to standard cable access (CATV) Option 1 1 Connect one end of the TV coaxial cable (optional) to your cable service access. VGX-XL2A Digital Living System 23