Symantec 16-00-00091 Installation Guide - Page 72
Configuring Virtual Private Networks VPN, Enable NetBIOS Broadcast
![]() |
UPC - 037648211703
View all Symantec 16-00-00091 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Configuring Virtual Private Networks (VPN) 2. In the Name field, enter a descriptive name for the Security Association. The Security Association Name must be between 1 and 15 characters long. 3. Click the Enable radio button. 4. From the WAN drop down list, select a WAN port . 5. From the PPPoE Session drop down list, select the Session number. Use Session 1 if you only have one session available from your ISP. 6. In the Incoming SPI field, enter your Incoming Security Parameter Index (SPI). The Security Parameter Index (SPI) is a hexidecimal number (0-9, a-f, A-F) or a decimal number. Use 0X as a prefix for hex numbers. 7. In the Outgoing SPI field, enter your Outgoing Security Parameter Index (SPI). The Security Parameter Index (SPI) is a hexidecimal number (0-9, a-f, A-F) or a decimal number. Use 0X as a prefix for hex numbers. 8. Form the Encryption Method drop down list, select an Encryption Method. 9. In the Encryption Key field, enter your Encryption Key. The Encryption Key is a minimum of 8 characters or 16 hex numbers for DES and 24 characters or 48 Hex numbers for 3 DES. 10. In the Authentication Key field, enter your Authentication Key. The Authentication Key is a minimum of 16 characters or 32 hex numbers for MD5 and 20 characters or 40 hex numbers for SHA1. 11. In the Gateway Address field, enter the Gateway Address of the Destination Network. The format for the Gateway Address is a minimum of seven digits ( x.x.x.x) and a maximum of fifteen digits (xxx.xxx.xxx.xxx). For the VPN client, set to 0.0.0.0. You can also use a DNS name in the Gateway Address field. 12. Click the Enable NetBIOS Broadcast radio button to forward Netbios broadcast packets. 5-4
![](/manual_guide/products/symantec-160000091-installation-guide-bb39d0e/72.png)