Symantec 16-00-00091 Installation Guide - Page 77
To con a VPN with Dynamic Key, VPN Dynamic Key screen part 2, VPN - Dynamic Key
UPC - 037648211703
View all Symantec 16-00-00091 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
To configure a VPN with Dynamic Key Figure 5-4: VPN Dynamic Key screen part 2 1. From the Main Menu, select VPN - Dynamic Key. 2. In the Name field, enter a descriptive name for the Security Association. 3. Click the Enable radio button. 4. From the WAN drop down list, select a WAN port. 5. From the PPPoE Session drop down list, select the Session number. Use Session 1 if you only have one session available from your ISP. 6. Click the Main Mode or Aggressive Mode radio button to set the Phase 1 Negotiation Mode. Main Mode uses an exchange of six messages to validate the identity of the initiator and respondent. By default, main mode uses IP addresses to identify the VPN gateways. However, this may be overwritten with a string label if the address of the gateway is 5-9