TASCAM BD-MP4K Owners Manual - Page 18

Settings On the Settings screens, which include the General Settings, Display Settings, Audio Settings and System Information screens, settings can be made and information checked, for example. While the Settings icon is selected, press the ENTER button to show icons for the various settings. To move between menus, confirm settings and execute items, use the shift* functions of buttons on the unit or use the cursor and ENTER buttons on the remote control. (These explanations will primarily use remote control operations.) * To move the cursor, confirm settings and execute items using the unit, press the HIDE/MENU [SHIFT] button and the button with the desired shift function (shown below the button with light characters on a dark background) at the same time. NOTE Settings cannot be opened when the HIDE MENU function is enabled. Settings screens can be opened by pressing the SETUP button on the remote control. Some items, however, cannot be changed when, for example, playing, paused or stopped. Basic remote control functions ppTo exit a folder or submenu, press the l cursor button repeatedly to return to the first screen. ppPress the HOME button to return to the Home Screen. ppPress the RETURN button even during operation to return to the previous screen. ppIn the lists of settings below, underlined Option items are default values. General Settings System Function Options Screen Saver On/Off HDMI CEC Disk Auto Upgrade Load Default Upgrade Easy Setup Copyrights HDMI1 ON/HDMI2 ON/CEC OFF On/Off More... ppDisc ppStorage More... More... Explanation Turn the screen saver on/off. If "On" is selected, the following functions become enabled when nothing is playing back or when playback is stopped or paused. ppA screensaver will appear after about 3 minutes without operation. ppThe unit will automatically turn off after about 10 minutes without operation. When an HDMI cable is used to connect a device such as this unit that supports HDMI CEC to a TV that supports HDMI CEC, this function allows the remote control to link operation of both of them. (When off, only the unit will respond to the remote control.) If an upgrade disc is loaded into this unit, upgrading will occur automatically. This function restores the various settings stored in the backup memory of the unit to their factory default values. Use to upgrade the unit firmware. (The medium used for the upgrade can be selected.) ATTENTION When using a USB flash drive or an SD card to upgrade the unit, do not connect any other type of media to other connectors. The following settings can be made easily using a setup wizard: pplanguage, monitor resolution and monitor aspect ratio Use the General Settings items to make additional settings. This shows the GNU General Public License. 18 TASCAM BD-MP4K