TASCAM BD-MP4K Owners Manual - Page 30

Loading and removing discs Inserting and removing SD cards Loading discs Press the OPEN/CLOSE (-) button on the main unit or remote control. Open the disc tray and place the disc on it with the label side up. Press the OPEN/CLOSE (-) button again to close the disc tray. Inserting SD cards Insert an SD card into the SD card slot on the front of the unit to enable playback. NOTE SD cards can be inserted whether or not the unit is on or off. iiInserted SD cards with the correct orientation. iiThe label should be up and the connector should be inserted toward the back. Removing SD cards OPEN/CLOSE button on main unit Turn the unit off or stop operation before removing an SD card. OPEN/CLOSE button on remote control. After a disc is loaded, the unit will read its data. LOAD will appear on the display while the disc is being loaded. The following will be shown when loading completes. oo Blu-ray disc: BDMV or BDAV oo DVD: DVD oo Audio CD: CD oo DATA CD, etc.: DATA CAUTION Do not remove an SD card when the unit is operating (including playing back). Failure to do so could cause data loss and sudden loud noises from monitoring equipment, which could damage the equipment or harm hearing. 1. Press the SD card in gently to make it come out. 2. Pull the SD card out by hand. SD card write protection switches SD cards have write-protection switches that prevent writing new data to them. NOTE iiWhen the disc tray is open, OPEN will appear on the display. (While the disc tray is being closed, CLOSE will appear on the display.) iiIf a disc other than a playable CD is inserted or a disc is inserted upside down, the unit will automatically eject it. Connecting and disconnecting USB flash drives Ejecting discs Press the OPEN/CLOSE (-) button on the main unit or remote control. After the disc tray opens, pick the disc up by its center and remove it. NOTE The OPEN/CLOSE (-) button functions when the unit is turned on. Connecting USB flash drives Connect a USB flash drive to the USB port on the front of the unit to enable playback. NOTE You can connect a USB flash drive when the unit is on or off. Disconnecting USB flash drives Turn the unit off or stop operation before disconnecting a USB flash drive. ATTENTION Never disconnect a USB flash drive when the unit is operating (including playing back or writing data to the USB flash drive). Doing so could cause the loss of data or damage the unit. 30 TASCAM BD-MP4K