TASCAM BD-MP4K Owners Manual - Page 22
Display Settings
![]() |
View all TASCAM BD-MP4K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Display Settings TV Function Options TV Screen Resolution pp16:9 Full pp16:9 Normal pp4:3 Pan & Scan pp4:3 Letterbox ppAuto pp480I/576I pp480P/576P pp720P pp1080I pp1080P pp2160P HDR Setting Auto/HDR/SDR Dolby Vision mode Auto/Low latency/LL RGB/Off Explanation Use to set the display aspect ratio. pp16:9 Full: This sets the aspect ratio to 16:9. 4:3 video will also be converted to 16:9. pp16:9 Normal: This usually sets the aspect ratio to 16:9. 4:3 video will be shown with black bands on the left and right sides. pp4:3 Pan & Scan: This sets the aspect ratio to 4:3. 16:9 video will also be converted to 4:3. pp4:3 Letterbox: This usually sets the aspect ratio to 4:3. 16:9 video will be shown with black bands on the top and bottom. Use to set the image resolution. ppIf Auto is selected, this unit will detect the optimal resolution for the monitor or TV. In this case, a message confirming whether to save the selected setting will appear. Select OK as necessary. Set whether signals output are high dynamic range (HDR) or standard dynamic range (SDR). 1 ppAuto: The unit switches automatically between HDR and SDR resolutions. ppHDR: HDR resolution is always output. ppSDR: SDR resolution is always output. NOTE This function cannot be used when the Dolby Vision mode is enabled. Set the Dolby Vision mode. 2 TV System HDMI Color Space HDMI Deep Color HDMI 1080P 24Hz HDMI 3D NTSC/PAL/Multi ppRGB ppYCbCr ppYCbCr422 ppFull RGB 30-bit/36-bit/48-bit Off On/Off Auto/Off Select the broadcast format3 of the device connected to the unit. Select the HDMI output color space. Select the HDMI output deep color mode.4 NOTE This function cannot be used if the HDMI Color Space is set to "YCbCr422". Turn frame rate conversion on/off for 1080P Blu-ray discs that play back at 24 Hz. ppWhen Auto is selected, the 3D signal will automatically be output when 3D video is played. ppWhen Off is selected, 3D signals will not be output. * 1 For this function to work properly, the TV or monitor must support HDR. * 2 For this function to work properly, the TV or monitor must support Dolby Vision. * 3 When in a region that supports both NTSC and PAL, select "Multi". * 4 For this function to work properly, the TV or monitor must support HDMI version 1.3 or later. 22 TASCAM BD-MP4K
![](/manual_guide/products/tascam-bdmp4k-owners-manual-e023b7b/22.png)