TASCAM BD-MP4K Owners Manual - Page 25
System Information, Post-processing settings, S/PDIF Output Configuration
![]() |
View all TASCAM BD-MP4K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Test Tone More... This outputs white noise from the speakers in counterclockwise order starting from the L speaker. Press the ENTER button while a speaker is highlighted to enable changing its speaker size, trim and delay settings. 1 NOTE The options and setting ranges are the same as in the channel configuration, but the subwoofer cannot be adjusted. * 1 Trim adjustment overview Digital full scale (−10 dB) is shown as "0" to make adjustment of surround channel speaker volume differences easier. If trim adjustment is unnecessary, leave it at its default setting (+10 dB). * 2 Lt/Rt is a two-channel downmix output that supports Dolby surround. When played on an ordinary stereo system, the L and R channel balance could be degraded. If this occurs, select Stereo. Post-processing settings Function EQ Options Explanation Off/Rock/Pop/Live/Dance/Classical/Soft The applies equalization to the audio. Downmix Off/DH/DVS/MVS This downmixes surround audio. ppDH: Dolby headphones ppDVS: Dolby virtual speakers oo Reference/Wide ppMVS: Virtual speakers oo Movie/Music NOTE MVS can only be used when the speaker setting channel configuration is 2.x. S/PDIF Output Configuration Function Configuration Options ppFL/FR ppSL/SR ppC/SW ppSBL/SBR ppL/R (−10 dBF)* * The maximum audio level will become −10 dBF only for L/R System Information Use to check the MAC address and revision of this unit. oo Model: BD-MP4K oo MAC address: xx-xx-xx-xx-xx-xx oo Revision: xxx.xxx Explanation The selection items are the same signals that are output from the analog outputs on the back of the unit. The selected analog output* is output from the COAXIAL digital audio output connector. TASCAM BD-MP4K 25
![](/manual_guide/products/tascam-bdmp4k-owners-manual-e023b7b/25.png)