TASCAM BD-MP4K Owners Manual - Page 43
Network connection overview, IP Protocol Priority
View all TASCAM BD-MP4K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Network connection overview From the Home Screen, use Settings > General Settings > Network to set the network connection. 1. In the submenu, set "Internet Connection" to "Enable". 3. To use IPv6, set "IPv6 On" in the submenu to "Enable". Use the ; cursor or ENTER button to move to the function setting. Use the j and k cursor buttons to select "Enable" or "Disable" and press the ENTER button to confirm. To exit a submenu, press the l cursor button repeatedly to return to the first screen. 2. Set the method of Internet access for the unit to "Ethernet" or "Wireless"* in the "Interface" submenu. * "Wireless" connection can only be used if a USB-wireless LAN adapter has been connected to the unit. (A USB-wireless LAN adapter is not included with this unit. Prepare one for use as necessary. For recommended wireless LAN adapters, see the TASCAM website (https://tascam. com/us/).) When enabled, "IP Protocol Priority" sets whether to prioritize IPv4 or IPv6. 4. From the "IPv4 Information" submenu, network information can be checked on the following screen. Press the RETURN button to return to the previous screen. oo Information shown Interface, address type, IP address, subnet mask, default gateway, DNS1 and DNS 2. 5. When "IPv6 On" is set to "Enable", "IPv6 Information" can be checked on the following screen. Use the ; cursor or ENTER button to move to the function setting. Use the j and k cursor buttons to select "Ethernet" or "Wireless" and press the ENTER button to confirm. The following message will appear when the current setting is changed. To continue , select "Yes" and press the ENTER button. oo Using a wireless connection The following connection methods can be selected. iiScan The unit will search for access points, allowing selection of a network. iiManual An SSID can be set manually to connect. iiAuto Connection is possible using Wi-Fi Protected Setup (WPS) standards. Press the RETURN button to return to the previous screen. oo Information shown Interface, Link-Local Address, IP address, Prefix, gateway, DNS1 and DNS 2 6. The network can be tested with "Connection Test" in the submenu. The following messages appear if there is a problem with the network connection. ii"Network FAILED" Problem with network ii"Proxy FAILED" Problem with proxy 7. Select how the unit's IPv4 address is set in the "IPv4 Setting" submenu. TASCAM BD-MP4K 43