TASCAM BD-MP4K Owners Manual - Page 29
Preparing the remote control, Installing batteries, When to replace batteries, Battery precautions
View all TASCAM BD-MP4K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Preparing the remote control Installing batteries 1. Open the cover on the back. 2. Insert two AAA batteries, being certain to use the correct ¥ and ^ orientations. 3. Close the cover. When to replace batteries Replace both batteries with new ones if the distance from the main unit that the remote can be used decreases or if the unit stops responding to the remote buttons. Battery precautions Misuse of batteries could cause them to leak or rupture, for example. Carefully read and follow the battery caution labels. (see "CAUTIONS ABOUT BATTERIES" on page 6) Using the wireless remote control See "Wireless remote control (TASCAM RC-BDMP4K)" on page 13 for the button functions. When using the remote control, point it toward the receiver on the unit and use it within the range shown below. Remote control signal receiver Remote control operation range Up to 10 m from front From any angle within 15º of front ATTENTION iiOperation might not be possible if there are obstacles. iiRemove the battery if not using the remote control for a long time (a month or more). iiIt battery fluid should leak, wipe away any fluid inside the case thoroughly and install a new battery. iiWhen using other devices that can be controlled by infrared rays, operation of this remote control could cause those devices to function improperly. Turning the unit on and off NOTE When the power cord is connected to the unit and power is supplied from an outlet, the unit will start up automatically when it receives power. (This will also happen when power supply resumes after a power outage or the main power has been off for another reason.) When the STANDBY/ON indicator on the front of the unit is lit, press the button or the remote control STANDBY/ON button. Startup Screen HELLO Lock Status Display Screen LOCK: OFF Active Screen BDMV After the unit starts up and the Startup Screen is shown followed by the Lock Status Screen for three seconds, the Active Screen will open. Turning the unit off Press the button on the front of the unit or the remote control STANDBY/ON button to turn the unit off. During shutdown, the Shutdown Screen will appear. When shutdown completes, the display will turn off, and the STANDBY/ON indicator will light red. ATTENTION Do not turn the power off or disconnect the power cord when the unit is operating (including playing back or writing data to a USB flash drive). Doing so could damage the unit. TASCAM BD-MP4K 29