TP-Link TD-W8968 TD-W8968 V1 User Guide - Page 36
Bridge, Enter the IP Address and Subnet Mask provided by ISP. If
View all TP-Link TD-W8968 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide Figure 4-8 ¾ IP Address/Subnet Mask: Enter the IP Address and Subnet Mask provided by ISP. If you forget, you can ask your ISP. ¾ DNS Server/Secondary DNS Server: Type in your preferred DNS server. ¾ Default Gateway: select a WAN Interface from the drop-down list as the IPv4 default gateway. 4.4.1.6 Bridge If you select this type of connection, the modem can be configured to act as a bridging device between your LAN and your ISP. Bridges are devices that enable two or more networks to communicate as if they are two segments of the same physical LAN. 27
TD-W8968
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
27
Figure 4-8
¾
IP Address/Subnet Mask:
Enter the IP Address and Subnet Mask provided by ISP. If you
forget, you can ask your ISP.
¾
DNS Server/Secondary DNS Server:
Type in your preferred DNS server.
¾
Default Gateway:
select a WAN Interface from the drop-down list as the IPv4 default
gateway.
4.4.1.6 Bridge
If you select this type of connection, the modem can be configured to act as a bridging device
between your LAN and your ISP. Bridges are devices that enable two or more networks to
communicate as if they are two segments of the same physical LAN.