TP-Link TD-W8968 TD-W8968 V1 User Guide - Page 47
Clients List, 4.5.3 Address Reservation, TD-W8968, DHCP Server, Clients List, Client Name
View all TP-Link TD-W8968 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide ) Note: 1) To use the DHCP server function of the Modem Router, you must configure all computers on the LAN as "Obtain an IP Address automatically". 2) You have to disable NAT of the WAN connections, or the DHCP Relay may not take effect. 3) If you select Disabled, the DHCP function will not take effect. Click the Save button to save your settings. 4.5.2 Clients List Choose menu "DHCP Server"Æ"Clients List", you can view the information about the clients attached to the Modem Router in the screen as shown in Figure 4-20. Figure 4-20 ¾ Client Name: The name of the DHCP client ¾ MAC Address: The MAC address of the DHCP client ¾ IP Address: The IP address that the Modem Router has allocated to the DHCP client ¾ Valid Time: The time of the DHCP client leased. After the dynamic IP address has expired, a new dynamic IP address will be automatically assigned to the user. You cannot change any of the values on this page. To update this page and to show the current attached devices, click the Refresh button. 4.5.3 Address Reservation Choose menu "DHCP Server"Æ"Address Reservation", you can view and add a reserved address for clients via the next screen (shown in Figure 4-21).When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to the servers that require permanent IP settings. 38