TP-Link TD-W8968 TD-W8968 V1 User Guide - Page 43
MAC Clone, 4.4.6 ALG Settings, TD-W8968, Leased Time, Advanced Setup, MAC Clone, Clone
View all TP-Link TD-W8968 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide • Leased Time: The Leased Time is the amount of time in which a network user will be allowed connection to the Modem Router with their current dynamic IP address. Enter the amount of time, in hours, then the user will be "leased" this dynamic IP address. After the dynamic IP address has expired, the user will be automatically assigned a new dynamic IP address. The default is 1440 minutes. The detailed configuration about DHCP server, please refer to section 4.5 DHCP Server. 4.4.5 MAC Clone Choose menu "Advanced Setup"Æ"MAC Clone", you can configure the MAC address of the WAN Interface as shown below. The WAN Interface List displays the Lay2 Interfaces you have configured on the section 4.4.1 WAN Settings, 4.4.2 Ethernet WAN and its default MAC Address. You can select corresponding WAN Interface from the drop-down list and click Clone button to clone your current PC MAC, and then click Save. ) Note: Figure 4-16 Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not be the same with each other. 4.4.6 ALG Settings Choose menu "Advanced Setup"Æ"ALG Settings", and then you can configure the basic security in the screen as shown in Figure 4-17. 34