TP-Link TD-W8968 TD-W8968 V1 User Guide - Page 69
Forwarding, 4.9.1 Virtual Servers
View all TP-Link TD-W8968 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide ) Note: RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE). 4.9 Forwarding There are four submenus under the Forwarding menu: Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function. 4.9.1 Virtual Servers Choose menu "Forwarding" → "Virtual Servers", and then you can view and add virtual servers in the next screen (shown in Figure 4-48). Virtual servers can be used for setting up public services on your LAN. A virtual server is defined as a service port, and all requests from Internet to this service port will be redirected to the computer specified by the server IP. Any PC that was used for a virtual server must have a static or reserved IP address because its IP address may change when using the DHCP function. Figure 4-48 ¾ Service Port: The numbers of External Service Ports. You can enter a service port or a range of service ports (the format is XXX - YYY; XXX is the Start port and YYY is the End port). ¾ IP Address: The IP address of the PC running the service application. ¾ Protocol: The protocol used for this application, either TCP, UDP, or All (all protocols supported by the Modem Router). ¾ Status: The status of this entry, "Enabled" means the virtual server entry is enabled. ¾ Edit: To modify or delete an existing entry. To setup a virtual server entry: 1. Click the Add New button. (pop-up Figure 4-49) 2. Select the service you want to use from the Common Service Port list. If the Common 60