TRENDnet TEW-723BRM Users Guide - Page 34
Con FTP ALG Config, Con NAT IP Mapping, Additional Security Settings
View all TRENDnet TEW-723BRM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
TRENDnet User's Guide Configure FTP ALG Config Advanced > NAT > FTP ALG Config File Transfer Protocol (FTP) is a common protocol for exchanging files over IP networks. 1. Log into your modem router management page (see "Access your modem router management page" on page 23). 2. Click on Advanced, click on NAT, and click on FTP ALG Config 3. Enter the port number in FTP ALG port and click on Add Dest Ports to save the port. 4. To remove a port from the FTP ALG Ports Table, select the port you wish to remove and click Delete Selected DestPort button. TEW-723BRM • Global Start IP: The start of the public IP address that you are accessing from • Global End IP: The end of the IP address range that you are accessing from 5. To delete a setting that was setup, select the rule you wish to delete under Action and click Delete Selected, or to delete all the rules click Delete all. Configure NAT IP Mapping Advanced > NAT > NAT IP Mapping Setting up NAT IP Mapping will allow remote access to your network with a specific IP address. 1. Log into your modem router management page (see "Access your modem router management page" on page 23). 2. Click on Advanced, click on NAT, and click on NAT IP Mapping. 3. Select the Type of NAT IP Mapping from the drop down menu. 4. Review and input the settings below and Apply Changes to save the settings. • Local Start IP: The start of the IP address range in your network • Local End IP: The end of the IP address range in your network © Copyright 2015 TRENDnet. All Rights Reserved. Additional Security Settings Advanced > DoS Settings To provide additional security, your router offers Anti-Attack feature. You may want to enable these features for additional network security. 1. Log into your modem router management page (see "Access your modem router management page" on page 23). 2. Click on Advanced and click on DoS Settings. 3. Select Enable DoS Prevention to activate mode. 4. A complete list of added protection will appear. Select items to enable protection and click Apply Changes to save settings. 31