TRENDnet TEW-828DRU User's Guide - Page 56

TRENDnet User's Guide Router Maintenance & Monitoring Reset your router to factory defaults Advanced > Administrator > Settings Management You may want to reset your router to factory defaults if you are encountering difficulties with your router and have attempted all other troubleshooting. Before you reset your router to defaults, if possible, you should backup your router configuration first, see "Backup and restore your router configuration settings" on page 54. There are two methods that can be used to reset your router to factory defaults.  Reset Button - Located on the side panel of your router, see "Product Hardware Features" on page 2. Use this method if you are encountering difficulties with accessing your router management page. OR  Router Management Page 1. Log into your router management page (see "Access your router management page" on page 9). 2. Click on Advanced and click on Administrator, then click on Settings Management. 3. Next to Load Factory Default Settings and Reset, click Load Default. When prompted to confirm this action, click OK. TEW-828DRU Router Default Settings Administrator User Name admin Administrator Password Please refer to sticker or device label Router Default URL http://tew-828dru Router IP Address 192.168.10.1 Router Subnet Mask 255.255.255.0 DHCP Server IP Range 192.168.10.101-192.168.199 Wireless 2.4GHz & 5GHz Enabled Wireless 2.4GHz & 5GHz Network Please refer to sticker or device Name/Encryption label Wireless 2.4GHz & 5GHz Guest Network Disabled Smart Connect (5GHz) Enabled USB SMB & FTP Settings Disabled (Password same as Administrator) USB SMB & FTP User Name Disabled (Password same as Administrator) USB SMB & FTP Password Disabled © Copyright 2015 TRENDnet. All Rights Reserved. 53