Toshiba TLP-MT7 Owner's Manual - English - Page 35

Displaying Information 35 Information on the input signal source, etc., can be displayed. Remote control INPUT ON / STANDBY KEYSTONE AUTO SET FREEZE MUTE PIP CALL RESIZE MENU VOL/ADJ CALL CALL Press CALL. The information described below is displayed. The information display turns off when the CALL button is pressed again. Status display Input - current input source H-resolution - the horizontal resolution of the input signal (at Computer input) V-resolution - the vertical resolution of the input signal (at Computer input) H-frequency - the horizontal frequency of the input signal (at Computer input) V-frequency - the vertical frequency of the input signal (at Computer input) Video mode - the color mode of the video signal (at video, S-video input) Signal format- the formatting of the Y/PB/PR signal (at Y/PB/PR input) Lamp time - the elapsed using time of the lamp Version - the version of the firmware Operations ENTER CT-90072 EXIT Notes • The information displayed is not refreshed even if it changes. To refresh the information, turn off the information display, then turn it back on. • The information display turns off if any other operation is performed. • The "Lamp time" shows an approximate time for lamp replacement. (It should not be used as a lamp warranty time counter.) If the time indicated here nears 1000, contact your store of purchase about obtaining a replacement lamp (TLPLX10, sold separately). • The "Lamp time" can be reset when the lamp is replaced. • The "Version" is the version of the control program used in the projector and is used for servicing, etc.