Toshiba TLP-MT7 Owner's Manual - English - Page 53

FULL MENU settings - Keystone (continued) 53 Remote control Control panel (Main unit side) AUTO KEYSTONE AUTO SET INPUT ON / STANDBY KEYSTONE AUTO SET FREEZE MUTE PIP CALL RESIZE MENU VOL/ADJ ENTER CT-90072 EXIT VOL/ADJ. 4-a 4-a 4-b 5 ENTER EXIT MENU INPUT ON/STANDBY TEMP LAMP ON BUSY FAN 4-b 5 When selecting "Keystone" in step 3. 4-a Press VOL/ADJ (+/-) to adjust and set. (-) (+) Keystone: To reduce the lower width To reduce the upper width When selecting "Horizontal reference value reset" in step 3. 4-b ENTER Press ENTER. The sub-menu of "Horizontal reference value reset" appears. ENTER Keystone Y/PB/PR Horizontal referrence value reset Recalibrate the horizontal reference value for keystone. Are you sure ? Yes No MENUQUICK Select ENTEREnter EXIT Back ENTER Use the selection buttons ( / ) to select "Yes" and press ENTER. The horizontal reference value is reseted. ENTER Adjustments & Settings ENTER MENU INPUT TEMP BUSY LAMP FAN ON/STANDBY ON EXIT KEYASUTOTONE VOL/ADJ. SAEUTTO 5 EXIT After the adjustments and settings are finished, press EXIT several times until the menu screen disappears. Press the EXIT button once when the FULL MENU is EXIT displayed, press twice when the sub menu is displayed. Notes • If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not stored in the memory. • The "Keystone" adjustments and settings are applied to all the input sources. (It is impossible to store different adjustments and settings for each input source.)