Toshiba TLP-MT7 Owner's Manual - English - Page 69

Lamp replacement continued

Get Toshiba TLP-MT7 - LCD Projector - 1000 ANSI Lumens PDF manuals and user guides
UPC - 022265950821
View all Toshiba TLP-MT7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Lamp replacement (continued) 69 Notes • When the CALL button is pressed, the "Lamp time" (the approximate amount of time the lamp has been used) is displayed. 35 • The lamp should be replaced if the total working time exceeds about 1,000 hours. When the "Lamp time" is displayed 1000 hours, the icon and a message appear. They will disappear when you do some operation. • Attach the lamp cover firmly after replacing the lamp. If it is not set correctly, the power will not turn on. • Use a new lamp when replacing it. • The lamp is made of glass and is very fragile. Do not touch the lamp with your bare hands and do not jolt or damage it. Do not use an exhausted lamp. • Dispose the exhausted lamp as toxic wastes. 5 Load a new lamp. Slide until it hits the bottom and tighten the two fixed screws. 6 3 Attach the lamp cover. Slide the cover in place and tighten two screws. 21 Maintenance AC IN 7 Reset the lamp timer. Refer to the lamp instructions for resetting.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Maintenance
69
Notes
•
When the
CALL
button is pressed, the “Lamp
time” (the approximate amount of time the lamp
has been used) is displayed.
35
•
The lamp should be replaced if the total working
time exceeds about 1,000 hours.
When the “Lamp time” is displayed 1000 hours,
the icon
and a message appear. They will
disappear when you do some operation.
•
Attach the lamp cover firmly after replacing the
lamp. If it is not set correctly, the power will not
turn on.
•
Use a new lamp when replacing it.
•
The lamp is made of glass and is very fragile. Do
not touch the lamp with your bare hands and do
not jolt or damage it. Do not use an exhausted
lamp.
•
Dispose the exhausted lamp as toxic wastes.
Lamp replacement (continued)
5
Load a new lamp.
Slide until it hits the bottom and tighten the two fixed screws.
6
Attach the lamp cover.
Slide the cover in place and tighten two
screws.
Reset the lamp timer.
Refer to the lamp instructions for resetting.
7
AC IN
3
2
1