Toshiba U100 PLU10C Users Manual Canada; English - Page 140
Power, Move it completely
View all Toshiba U100 PLU10C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Power and Power-Up Modes ■ Do not remove the battery pack while the computer is in Standby mode. Data is stored in RAM, so if the computer loses power it will be lost. ■ In Hibernation mode, data will be lost if you remove the battery pack or disconnect the AC adaptor before the save is completed. Wait for the HDD indicator to go out. ■ Do not touch the battery release latch while holding the computer. Or you may get injured by the dropped battery pack by unintentional release of the battery release latch. To remove a battery pack, follow the steps below. 1. Save your work. 2. Turn the computer's power off. Make sure the Power indicator is off. 3. Remove all cables connected to the computer. 4. Close the LCD display panel and turn the computer upside down. 5. Slide the battery lock (➀) to unlock position ( ) (Move it completely to the back). 6. Slide and hold the battery release latch (➁) to free the battery pack for removal, then slide out the battery pack (➂). Battery release latch Battery pack Battery lock Figure 6-1 Releasing the battery pack To install a battery pack, follow the steps below. 7. Insert the battery pack (➀). 6-12 User's Manual