Weider Pro 9020 English Manual - Page 17

Attach the Butterfly Arm 23 to the Left Upright

Get Weider Pro 9020 PDF manuals and user guides View all Weider Pro 9020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

20. While a second person holds the Butterfly Arm (23) near the Left Upright (14), insert the loop of 20 Cable B (64) through the hole in the Left Upright. Attach the Butterfly Arm (23) to the Left Upright (14) with two M10 x 68mm Bolts (98), two M10 Washers (93), two 48mm Spacers (81), an M10 Large Washer (116), and an M10 Locknut (84); do not tighten the Bolts yet. 98 81 93 64 14 116 84 23 21. Insert a V-pulley (57) into a Swivel Bracket (24) under Cable B (64). 21 24 Attach the V-pulley (57) with an M10 x 55mm Bolt (82) and an M10 Locknut (84). Repeat this step with the other Swivel Bracket (24). 84 24 64 57 82 22. Attach a Pulley (46) to one side of the Butterfly Arm (23) over Cable B (64) with an M10 x 45mm 22 Bolt (95) and an M10 Locknut (84). Attach a Pulley (46) to the other side of the Butterfly Arm (23) in the same way. 46 95 46 64 23 84 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
17
20
21
22
23
24
24
84
57
46
46
84
23
64
116
84
81
64
93
98
14
64
95
20. While a second person holds the Butterfly Arm
(23) near the Left Upright (14), insert the loop of
Cable B (64) through the hole in the Left Upright.
Attach the Butterfly Arm (23) to the Left Upright
(14) with two M10 x 68mm Bolts (98), two M10
Washers (93), two 48mm Spacers (81), an M10
Large Washer (116), and an M10 Locknut (84);
do not tighten the Bolts yet.
21. Insert a V-pulley (57) into a Swivel Bracket (24)
under Cable B (64).
Attach the V-pulley (57) with an M10 x 55mm
Bolt (82) and an M10 Locknut (84).
Repeat this step with the other Swivel
Bracket (24).
22.
Attach a Pulley (46) to one side of the Butterfly
Arm (23) over Cable B (64) with an M10 x 45mm
Bolt (95) and an M10 Locknut (84).
Attach a Pulley (46) to the other side of the
Butterfly Arm (23) in the same way.
82