Weider Pro 9020 English Manual - Page 24
Attach the Pulley 46 to the Right Upright 2
View all Weider Pro 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
36. Route Cable D (66) under a Pulley (46). Attach the Pulley (46), a Cable Trap (49), and two Half Guards (47) to the first set of holes in a U-bracket (27) with an M10 x 50mm Bolt (102) and an M10 Locknut (84). Make sure that the Cable Trap and the Half Guards are oriented as shown. 36 66 49 84 46 47 47 27 102 37. Route Cable D (66) over a Pulley (46). Attach the Pulley (46) to the Right Upright (2) with an M10 x 45mm Bolt (95) and an M10 Locknut (84). 37 84 2 46 95 66 38. Route Cable D (66) under a Pulley (46). Attach the Pulley (46), a Cable Trap (49), and two Half Guards (47) to the second set of holes in two Pulley Plates (26) with an M10 x 50mm Bolt (102) and an M10 Locknut (84). Make sure that the Cable Trap and the Half Guards are oriented as shown. 38 84 47 26 66 46 49 26 47 102 24