Weider Pro 9020 English Manual - Page 22
Route Cable C 65 over a Pulley 46.
![]() |
View all Weider Pro 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
32. Route Cable C (65) over a Pulley (46). 32 Attach the Pulley (46) and a Cable Trap (49) to the Left Upright (14) with an M10 x 45mm Bolt (95) and an M10 Locknut (84). Make sure that the Cable Trap is oriented as shown. 14 49 46 84 95 65 33. Insert the end of Cable C (65) into a U-bracket (27). Tighten an M8 Locknut (119) onto the end 33 of Cable C. 65 119 27 22
![](/manual_guide/products/weider-pro-9020-english-manual-860c175/22.png)
22
33. Insert the end of Cable C (65) into a U-bracket
(27). Tighten an M8 Locknut (119) onto the end
of Cable C.
32
33
95
49
119
27
46
84
14
65
65
32. Route Cable C (65) over a Pulley (46).
Attach the Pulley (46) and a Cable Trap (49) to
the Left Upright (14) with an M10 x 45mm Bolt
(95) and an M10 Locknut (84).
Make sure that
the Cable Trap is oriented as shown.