Weider Pro 9020 English Manual - Page 8
Attach the Long Base 1 to the Weight Stack
![]() |
View all Weider Pro 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2. Identify the Short Base (17) and the Weight Stack Base (109). Orient both parts as shown. 2 Attach the Short Base (17) to the Weight Stack Base (109) with two M10 x 68mm Bolts (98), two M10 Washers (93), and an M10 Locknut (84); do 84 not tighten the Bolts yet. 109 93 98 93 17 3. See the inset drawing. Identify the Long Base (1). 3 Attach the Long Base (1) to the Weight Stack Base (109) with two M10 x 68mm Bolts (98), two M10 Washers (93), and an M10 Locknut (84); do not tighten the Bolts yet. Then, attach the Long Base (1) to the Short Base (17) with two M10 x 68mm Bolts (98) and two M10 Washers (93); do not tighten the Bolts yet. 98 93 1 93 98 17 109 84 1 8
![](/manual_guide/products/weider-pro-9020-english-manual-860c175/8.png)
8
2.
Identify the Short Base (17) and the Weight
Stack Base (109). Orient both parts as shown.
Attach the Short Base (17) to the Weight Stack
Base (109) with two M10 x 68mm Bolts (98), two
M10 Washers (93), and an M10 Locknut (84);
do
not tighten the Bolts yet.
3.
See the inset drawing.
Identify the Long
Base (1).
Attach the Long Base (1) to the Weight Stack
Base (109) with two M10 x 68mm Bolts (98), two
M10 Washers (93), and an M10 Locknut (84);
do
not tighten the Bolts yet.
Then, attach the Long Base (1) to the Short
Base (17) with two M10 x 68mm Bolts (98) and
two M10 Washers (93);
do not tighten the
Bolts yet.
3
2
109
17
93
93
84
98
109
17
1
93
93
84
98
98
1